| |
EI2GYB > PACKET 12.10.25 13:06z 85 Lines 5085 Bytes #359 (0) @ WW
BID : 46475_EI2GYB
Subj: INTRODUCTION TO PACKET RADIO - Part 9
Path: HB9ON<IK7NXU<IK6IHL<IZ3LSV<DB0ERF<OK0NAG<OK0NBR<OK2PEN<N3HYM<VE3CGR<
VE6NAS<VE2PKT<PY2BIL<EI2GYB
Sent: 251012/1227Z 46475@EI2GYB.DGL.IRL.EURO LinBPQ6.0.25
INTRODUCTION TO PACKET RADIO - Part 9 - by Larry Kenney, WB9LOZ
In this part of the series we're going to look at the White Pages. No,
not your local telephone directory, but the packet radio directory known
as the "White Pages". You help supply the information for "WP", and you
can also use it to find the home BBS, QTH and zip code of your friends on
packet.
"White Pages" was initially designed by Eric Williams, WD6CMU, of Richmond,
California. Hank Oredson, W0RLI, later added a WP database to his packet
bulletin board software, and now most of the BBS software programs have
some form of the White Pages available. It's a database of packet users
showing their name, home BBS, QTH and zip code. It's updated and queried by
packet message, allowing stations from all over the world to take advantage
of it.
When users enter their name and other information into their BBS user file,
it gets included in the WP database. The White Pages server at each BBS
also scans the forwarding headers of all messages received, extracts call-
sign information and adds that to the database. The software automatically
assembles an update once a day containing all of the new WP information and
any changes the database has received in the past 24 hours. This update is
then forwarded to the regional White Pages server. The regional server, in
turn, takes all of the information it has received from other BBSs and
sends out updates to other BBSs in the area, as well as to the N6IYA BBS
in Fulton, California, the national White Pages server. As a result, we
have a large database of information on packet users world-wide. By query-
ing WP, you can easily find the name, home BBS, QTH and zip code of other
stations on packet.
If your BBS is operating with its own WP database, you may make inquiries
of it using either the "I" or "Q" command, depending on the software being
used. Simply enter I or Q followed by the callsign you'd like information
about. If you wanted information on WB9LOZ, for example, you would enter:
I WB9LOZ or Q WB9LOZ
Check the help information on your BBS to see which command is the one used
there. Some BBSs also offer commands that allow you to search the WP data-
base for station lists using location or zipcode information. Try ?I ?Q
or ?WP for details.
If your local BBS doesn't have the information you are looking for, it can
be obtained from your regional WP server or from the national WP server.
Since query messages are read and answered by the WP software, not by a
person, you must use the correct format: callsign ?
You address your query to WP @ the callsign of the server you want to use.
The word QUERY is entered for the subject. You may then may include as
many requests as you wish in the text of each message, but each must be on
a separate line.
Here's an example of a message sent to N6IYA, the national White Pages
server:
SP WP @ N6IYA.#CCA.CA.USA.NOAM (The same format would be used
Enter subject of message: Query (to send a query message to your
Enter text: (regional WP database.)
K9AT ?
WA6DDM ?
NG2P ?
W1KPL ?
(Control Z OR /EX)
Capital and lower case letters may both be used within the message.
Just like all other packet messages, messages addressed to WP are forwarded
from BBS to BBS toward their destination. If a BBS operating with the
W0RLI WP Server handles a query message, it will respond with any pertinent
information that it has available. As a result, you might receive more
than one response to your WP query.
If the information on a callsign in a WP database is not updated, it is
deleted after a certain length of time specified by the sysop. This time
frame is normally 90 to 180 days, although some systems retain information
for up to a year.
It is important to note here that you should choose ONLY ONE BBS as your
home BBS, the one where you want all of your messages delivered. You should
also make sure that it is a full service BBS, not a personal mailbox, or
mail will not be forwarded to you. Always enter that callsign when you are
asked to enter your home BBS, even if you are using another system at the
time.
When a message arrives at the destination BBS given in the "@ BBS" column,
some of the BBS software will check the White Pages information to make sure
that the message has been delivered to the right place. If it finds that a
different BBS is listed as the addressee's home BBS, it will insert that BBS
callsign in the message and send it on its way. If you enter different home
BBS calls on several BBSs, your mail could easily end up being sent from BBS
to BBS and never reach you.
If you move or change your home BBS, you should then make sure that you
update the information for your call in the White Pages database. Use the
NH, NQ and NZ commands to update the information. Making sure that the
information in the White Pages is correct will help to get your messages
delivered to the correct BBS. - - - -
Read previous mail | Read next mail
| |
